Adimtech APDCAM Manual de Instruções descarregar pdf (Página 56)

10 GB Communication

Version

1.0

& Control Card Instruction Manual

5.6 CAM Timer Instructions

SETCTCONTROL instruction

Byte

Opcode

0x0

120

Length

0x0002

ETF

ETR

Mode

Description:

Set the control register of the CAM Timer module. (Use the

SAVESETTINGS instruction to save changes to the EEPROM.)

A: 0/1 – Idle/Armed state

S: 0/1 – Manual Stop/Start

Mode: 00 – Return to Idle state after all the timers finish pulse

generation.

01 – Return to Armed state after all the timers finish pulse

generation.

10 – Return to Running state after all the timers finish pulse

generation.

ETR: 0/1 – External trigger rising slope disabled/enabled

ETF: 0/1 – External trigger falling slope disabled/enabled

IT: 0/1 – Internal trigger disabled/enabled

SETCTOUTPUT instruction

Byte

Opcode

0x0

Length

0x0002

Output Polarity

Output Enabled

Output in Armed state

Output in Idle

state

Description:

Set the output register of the CAM Timer module. (Use the

SAVESETTINGS instruction to save changes to the EEPROM.)

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 82 83

Comentários a estes Manuais

Sem comentários

Adimtech APDCAM Manual de Instruções Página 56

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras bridge Adimtech APDCAM